DUI Metrology Dictionary

Flow monitor (in the context of the Intoxilyzer)

An Intoxilyzer 8000, 8000C, and 5000EN all have air flow systems that need to be properly calibrated at the factory or the Canadian Authorized Service Centre. As with ethyl alcohol calibration, air flow calibration (which affects what you see on the flow monitor) requires a special air pump that is reliable and traceable to reference standards for volume and flow. The flow system in any of these machines can be negligently uncalibrated (I've done it to my 5000EN accidentally). The instrument will still appear to work just fine but the flow monitoring system, fundamental to any refuse/failure to blow charge will be compromised. The flow monitor is available on all Intoxilyzer 8000s and 8000Cs but is only available IN ONTARIO on later software versions to an ordinary qualified technician by an Esc Esc F keyboard entry. It is not available to an ordinary qualified technician IN ONTARIO on older software versions. This is a ridiculous situation. In the United States, the flow monitor indicates flow during the course of every (ACABA and ABA) breath test so that the technician can see (not just guess) the actual volume that the subject is blowing. Resting value or R value is just the floating zero point of the calibration of the flow system depending on both aging hardware and software calibration of flow. See 2013 Training Aid page 144.

© 2019 Allbiss Lawdata Ltd.

This site has been built by Allbiss Lawdata Ltd. All rights reserved. This is not a government web site.

For more information respecting this database or to report misuse contact: Allbiss Lawdata Ltd., 303-470 Hensall Circle, Mississauga, Ontario, Canada, L5A 3V4, 905-273-3322. The author and the participants make no representation or warranty  whatsoever as to the authenticity and reliability of the information contained herein.  WARNING: All information contained herein is provided  for the purpose of discussion and peer review only and should not be construed as formal legal advice. The authors disclaim any and all liability resulting from reliance upon such information. You are strongly encouraged to seek professional legal advice before relying upon any of the information contained herein. Legal advice should be sought directly from a properly retained lawyer or attorney. 

WARNING: Please do not attempt to use any text, image, or video that you see on this site in Court. These comments, images, and videos are NOT EVIDENCE. The Courts will need to hear evidence from a properly qualified expert. The author is not a scientist. The author is not an expert. These pages exist to promote discussion among defence lawyers.

Intoxilyzer®  is a registered trademark of CMI, Inc. The Intoxilyzer® 5000C is an "approved instrument" in Canada.

Breathalyzer® is a registered trademark of Draeger Safety, Inc., Breathalyzer Division. The owner of the trademark is Robert F. Borkenstein and Draeger Safety, Inc. has leased the exclusive rights of use from him. The Breathalyzer® 900 and Breathalyzer® 900A were "approved instruments" in Canada.

Alcotest® is a registered trademark of Draeger Safety, Inc. The Alcotest® 7410 GLC and 6810 are each an "approved screening device" in Canada.

Datamaster®  is a registered trademark of National Patent Analytical Systems, Inc.  The BAC Datamaster® C  is an "approved instrument" in Canada.